WIND MACHINE

SYMMETRY ENDÜSTRİYEL MAKİNE SANAYİ ve TİC. A.Ş.


The C49 composite 4 blade fan has greatly improved the performance of frost fans and uses the most efficient blade on the market. The C49 has increased coverage, lower fuel consumption, is quieter and has a longer blade life. C49 blade sets can be fitted to most other brand fans to improve their performance.
The C59 composite 5 blade fan operates at lower rpm, whilst covering the same area as the C49 with even lower noise levels.
The technology behind the C49 machine has seen it grow in popularity to become the best-selling frost fan in Turkey and all other countries.
Symmetry A.S. the C24 composite 2 blade fan and the C39 composite 3 blade fan to suit different markets around the world.

– Galvanised 10m Tower

– 1 year warranty

– 10 inch centrifugal clutch with torsional coupling

– Fully installed on site and commissioned

– Perkins 1106D-70TA

– John Deere 6068T

– Standard Cabinet: Aluminium engine enclosure – the fully lockable, powder-coated aluminium enclosures are resistant to corrosion and orchard sprays. Being fully enclosed, they restrict rodents and birds

– Premium Cabinet: Integral 500 litre lockable fuel tank – sits under the engine with capacity for approximately 24 hours running time. There is a fuel level sensor, which prevents the engine from running the fuel tank dry. Hence the fuel system will never need to be bled if the fuel supply runs out

The new FrostBoss controller is the most up to date,reliable and robust start module available in manual or auto start.

Remote Monitoring Option

– Remote internet monitoring by Loncel Technologies

– Fan status, low fuel, battery voltage, inversion & canopy temperatures, wind speed, full run history and other readings as required

Manual

– Simple controls & display

– Key start

– Engine shutdown protection

Auto Start

– Wireless temperature sensoring

– Auto start/stop to operator preset temperatures

– High wind shutdown & restart

– Engine shutdown protection

– Solar panel & voltage regulator for battery life

– Warning strobe light mounted 6.5m up the tower

c49-s1a

WHAT IS THE BENEFIT OF A C49 FAN?


Fan Efficiency. The Frost Boss C49-4 blade fan provides the greatest coverage for the lowest fuel consumption of any frost fan on the market. With large temperature inversions and low katabatic wind speeds, the C49 can achieve coverage of approximately 60-80 decare. 
The noise signature from the C49 is smooth, and at a low level, without the distinctive “Iroquois” chopping sound of the 2-bladed fans. The 4 blade fan, by virtue of its greater blade area, allows a higher blade pitch to be used without running the risk of the blades stalling. This allows the fan to run at a slower speed, thus making less noise, while still doing the same work.
It also converts more of your fuel into useful wind and less into turbulence and noise. Evidence from actual frost events shows that 4 blade fans have a greater penetration capability than 2 blade fans, thus giving them greater coverage.

SERVICING


 

We recommend frost fans be serviced annually in summer or winter to avoid costly breakdowns during spring or autumn frost seasons.
Lack of use is the major cause of failure in frost fans. They should be run and checked well before they are needed for crop protection.
We service all manufacturers’ brands of frost fans.

ANNUAL ROUTINE SERVICING

preventative maintenance of all frost fans.

EMERGENCY REPAIR SERVICE

through our support network.

LARGEST RANGE

of frost fan spares, for all brands of machines.

COMPLETE RE-LOCATION SERVICE

whether it is on the same property or from one site to another.

PRE-SEASON CHECK

TOWER & GEARBOX SERVICE

FULL ANNUAL SERVICE


Includes inspection, operation and safety checks of engine, tower and fan blades.

Qualified frost fan technicians undertake the service.

Qualified frost fan technicians undertake the service.

Inspection and change of oils, filters and coolants on engine as required.

Inspection and/or oil change of top and bottom gearboxes.

Inspection of all engine fittings, connections, filters and operation.

Check of engine rpm and controller function including ice slurry probe check.

Inspection of fan assembly, blades and driveline.